 |
產品服務專線：04-27080265 |
Queensgate Nanopositioning Devices & Sensors | Nanopositioning Control Electronics | Prior
Prior NPC-D-5200 數位控制器
Digital Controller
 |
- Precision capacitive sensor measurement circuit for closed loop operation
- Update rate of 8.3 Micro Seconds (120KHz)
- Low Electronic Noise. The low noise design allows stage position noise as low as a few tens of picometres
- High Power rating, -30 to +150V drive with 160mA continuous current as standard
- Stage designs incorporate capacitive sensors which give precise positional feedback in closed loop mode delivering high resolution/low noise and high linearity of movement.
- The controller is updated with the position of the stage 120000 times per second. This contributes to high speed positioning accuracy for applications that need high speed movement of the stage.
|
|
| Description |
|
Queensgate’s NPC-D-5200 Digital Controller；Precision, Accuracy and Speed for the best in Nano-positioning
A standalone single axis closed loop piezo actuator controller designed to cover a wide range of challenging applications needing the best dynamic performance. There is no compromise; the NPC-D-5200 delivers precision, accuracy and speed.
|
| Interfacing |
- Analogue command and position output +/-10 V
- Digital commands over USB or optional RS232C and Ethernet control interfaces
- Easy to interface with OEM software using supplied DLL (Dynamic Link Library). In position digital outputs can be used to interface with external devices. Expansion slot to allow custom board for OEM integration.
- Examples of software in C/C++, Python and LabVIEW® provided.
- User programmable Function Playback of custom programmed waveforms such as constant velocity profiles.
- TTL input/output triggers f or external control.Programmable when “Function playback” feature used.
- TTL In-Position output to indicate when NanoMechanism reaches the desired/set position (user selectable positon accuracy).
|
|
|
| Technical Specification |
| Parameter |
Value |
Units |
Comments |
| Mechanical |
| Size (Width x Depth x Height) Height includes feet Not including protruding components at front and rear of controller |
268 x 194 x 70 |
mm |
Additional space required for rear connectors and cables |
| Weight |
1.7 |
kg |
|
| Cooling |
Fan forced air |
|
Vents on rear and base |
| Electrical |
| Power input |
96 to 265 47 to 63 |
Vrms Hz |
Using external supply. Only use approved power supply provides protective earth connection. |
| DC power input |
± 24 ± 0.75@5A |
V |
Only use Queensgate approved power supply |
| DC power input connector |
4 pin DIN Plus protective earth connection |
|
Rear panel |
| Connectivity |
| USB |
2.0 compliant |
|
USB type B connector. Note: power not taken from USB port. |
| Ethernet |
IEEE 802.3 |
|
RJ45 connector. Requires a Cat 5 male to male cable. MUST use shielded Ethernet cable. |
| Analogue input command |
BNC |
|
Per channel - front panel |
| Analogue Position Monitor output |
BNC |
|
Per channel - front panel |
| “TRIG” input, “TRIG” output, “IN-POS” output and Quadrature Interface |
25 pin D-type socket |
|
|
| Controller Synchronizing signals |
9 pin D-type socket |
|
Rear panel |
| Environmental - Operational |
| Temperature |
10 to 40 |
ºC |
|
| Relative Humidity 5 |
5 to 80 |
%RH |
Non-condensing |
|
|
| DataSheet |
|
|
