Prior Scientific Instruments Ltd. 產品服務專線:04-27080265

 

Queensgate Nanopositioning Devices & Sensors | Nanopositioning Control Electronics | Prior

Prior NS-2000 傳感器控制器

Sensor Controller

 

Prior-NS2000
  • Sub-nanometre position resolution
  • Zero hysteresis
  • User adjustable measurement bandwidth (50Hz, 500Hz or 5kHz)
  • User adjustable amplifier gain (for applications that do not use the full measuring range)
  • Selectable long (‘-L’) or short (‘- S’) measuring range (2pF or 10pF capacitance)
  • Compact stand-alone module
Description

The NS2000 is a single channel stand-alone electronic module for driving the NX and NC NanoSensor series. It operates by measuring the change in capacitance of a parallel plate capacitor and outputs an analogue voltage proportional to the NanoSensor gap. The voltage output varies linearly between -5V and +5V as the sensor gap changes from 50% to 150% of the nominal NanoSensor gap, this scaling is user settable. Its compact size, stand alone operation and high resolution makes this ideal for upgrading existing systems where Nanopositioning is required.

Applications
  • Metrology
  • Precision engineering
  • Vibration measurement
  • Building custom closed loop Nanopositioning systems
Technical Specification
Parameter Value Units Comments
Mechanical
Size (Width x Depth x Height) 218 x 77 x 34 mm
Power supply ±15 ±1 V
Current requirement 70 mA Typ
Sensor output -5 to +5 V Note 1
Dynamic physical (Typical values)
Scale factor 0.1 or 0.05 or 0.01 GV-1
Noise level (-S) <0.05 ppmHz-1/2 rms Note 2
Noise level (-L) <0.15
ppmHz-1/2 rms Note 2
Thermal drift 5 ppmK-1 Typ Note 2
Warm-up time 10 Minutes
Warm-up drift 80 ppm Note 2
PS rejection 10 ppmV-1 Note 2
Linearity error <0.2 % Note 3
Bandwidth 50, 500, 5000 ±10% Hz
DataSheet

search_offcanvas

X

Right Click

禁止任意複製或拷貝網站內容!