中惠科技有限公司 中惠科技有限公司
  • Image Analysis

    Image-Pro Platform

    • Image-Pro
    • Base Features
    • 2D Capture
    • 2D Measurements
    • 2D Automated Analysis
    • 3D Visualization Analysis
    • AutoQuant Deconvolution

    Image Analysis Solution

    • MA-Pro
      • Grain Size
      • Sphericity
      • Cast Iron
    • IMC Coverage
    • Cleanliness
    • CCL Resin Flow
    • Fiber Cross-Section

    Product Integration

    • Wafer Mapping & Inspection
    • Image Scanning System
    • Stage Conotrol System
    • Extend Depth Of Field
    • Defect Inspection
    • Image Measurement
    • Hardness Testing

    Packages for Image Analysis

    Image-Pro® AI
    Life Science

    Image-Pro® AI
    Materials Science

     

    2D Measure Module
    AI Deep Learning

    2D Measure Module
    Analysis Protocols

    Helpful

    • System Requirements
    • Supported File Formats
    • Version Comparison
  • Optoelectronics

    TOPCON Products

    • 2D Spectroradiometer (SR-5100 Series)
      • SR-5100 2D Spectroradiometer
      • SR-5000 2D Spectroradiometer
    • Spectroradiometer (SR Series)
      • SR-5A Spectroradiometer
      • SR-5AS Spectroradiometer
      • SR-5S Spectroradiometer
      • SR-5 Spectroradiometer
      • SR-UL2 Spectroradiometer
      • SR-NIR Near Infrared Spectroradiometer
    • Luminance Colorimeter (BM Series)
      • BM-7AC Luminance Colorimeter
      • BM-5AC Luminance Colorimeter
      • BM-9A Luminance Meter
    • 2D Luminance Colorimeter (UA Series)
      • UA-200A 2D Luminance Colorimeter
      • UA-10A Uniformity Analyzer
      • UA-20C Luminance & Chromaticity Uniformity Analyzer
      • UA-20Y Luminance Uniformity Analyzer
    • Luminance Colorimeter (RD Series)
      • RD-80SA Luminance Colorimeter
    • Illuminance Meter (IM Series)
      • IM-2D Illuminance Meter
      • IM-600/IM-600M Digital Illuminance Meter
    • Ultraviolet Meter (UVR Series)
      • UVR-T2 Industrial UV Checker
      • UVR-300 UV Radiometer
    • Topcon Calibration Service

    APACER Products

    • Spectroradiometer (Hand-held Type)
      • AL100 / AL110
      • AL250
    • Spectral Irradiance Meter (Hand-held Type)
      • Ai111
      • Ai30S
      • Ai101
      • Ai250
    • Automation Platform for Sprctorradiometer
  • Automation

    Prior Microscope Automation

    • Motorized Stages For Upright Microscopes
      • ProScan H101A Motorized Stages
      • ProScan H101F Motorized Stages
      • ProScan H105 Motorized 6" Travel Stage
      • ProScan H105F Motorized Flat Top 6" Travel Stage
      • ProScan H116 Motorized 8" Travel Stage
      • ProScan H116SPN Motorized 8" Travel Stage with Shuttle Chuck
      • ProScan HWL6AL12 Motorized 8" Travel Stage with Shuttle Chuck
      • ProScan H112 Motorized 12" Travel Stage
      • ProScan H138A Motorized Stage With 8 Slide Capacity
      • ProScan HT1111LC Hardness Testing Motorized Industrial Stage
      • OptiScan ES111 Motorized Stages
    • Motorized Stages For Inverted Microscopes
      • ProScan H117 Motorized Stage
      • ProScan HLD117 Linear Motor Ultra-precision Stage
      • OptiScan ES107 Economical Motorized Stage
    • Physiology Platforms
      •    ── XYZ Deck Physiology Platforms ──   
      • H189 High Precision XYZ Deck
      • HZ106KT1 High Precision XYZ Deck
      • HZ106KT1E High Precision XYZ Deck
      • ProScan HT11 Heavy Duty Motorized Stage
      • ZDP50 Microscope Translation Stage
      •    ── Z Deck Electrophysiology Platform ──   
      • Manual Z Deck Manual XY Stage
      • Motorized Z Deck XY Stepper Motor Stage
      • Encoded Motorized Z Deck
    • Robotic Sample Loaders
      • SL160 Robotic Slide Loader for Microscopy
      • PLW20 Robotic Well Plate Loader System
    • OpenStand® platform
      • OpenStand-V Inverted Microscopy Platform
      • OpenStand-L Large Format Microscopy Platform
      • OpenStand-U Upright Microscopy Platform
      • OpenStand-M Small Format Microscopy Platform

    Prior Imaging Components

    • Focus Mechanisms
      •    ── Piezo-driven Nanoscan ──    
      • NanoScan OP400 Piezo Objective Scanner
      • NanoScan OP800 Piezo Objective Scanner
      • NanoScan SP Piezo Z-Axis Stage
      • WP120A Single Axis Piezo Stage (12" Wafer)
      •     ── Focus Mechanisms ──    
      • FB201 Manual Focusing Block - 29mm
      • FB203 Motorized Focusing Mount - 38mm
      • FB204 / FB205 Stage Focusing Mount - 38mm
      • FB206 Stage Focusing Mount - 38mm
      • FB210 Motorized Focusing Mount - 50mm
      • FB212 Stage Focusing Mount - 50mm
      • PS3H122R Bolt-On Motorized Focus Drive
      • H275LMT Extended Travel Motorized Focus Tower
    • Laser Autofocus
      • PureFocus™850 Laser Autofocus System
    • Controllers & Joysticks
      • ProScan III Universal Multi-axis Controller
      • OptiScan III Affordable 3-Axis Controller
      • ES10ZE Single Axis Focus Controller
      • CS200 Series Joysticks
    • Filter Wheels, Turrets & Shutters
      • HF108 High-Speed 8 Position Filter Wheel
      • HF110 High-Speed 10 Position Filter Wheel
      • HF108IX3 8 Position Filter Wheel for IX3
      • HF6NTK 6 Position Motorized Turret Upgrade Kit for Nikon Ti2
      • HF202HT 25mm High Speed Shutters
    • Light Sources
      • L200 Fluorescence Microscope Illumination

    Queensgate Nanopositioning Devices

    • Nanopositioning Piezo Stages
      • NPS-X-15A/NPS-X-15B Low Profile Fast 20µm Stage
      • NPS-X-28C Titanium Ultra Fast 28µm Stage
      • NPS-Z-15A Ultra Low Drift 15µm Stage
      • SP Mini-500 Compact Sample Positioner
      • NPS-XY-100A
      • NPS-XY-100D
      • NPS-TG-7A Fast Tip Tilt
      • NanoScan OP400
      • NanoScan OP800
      • NanoScan SP Z Series
    • Precision Actuators & Translators
      • DPT-E Closed Loop Piezo Actuators
      • MTP Open Loop Piezo Actuators
      • NPS-Z-15L Ultra High Load Closed Loop 20μm Actuator
      • NPS-Z-500B Long Range 500μm Amplified Actuator
    • Nanosensors
      • NX Series Capacitive Sensors
      • NC Series Capacitive Sensors
    • Nanopositioning Control Electronics
      • NPC-D-5200 Digital Piezo Closed Loop Controller
      • NPC-D-6000 Series Digital Piezo Closed Loop Controller
    • Vacuum Compatible Products
      • DPT-E Closed Loop Piezo Actuators
      • NX Series Capacitive Sensors
      • NC Series Capacitive Sensors
      • NPS-XY-100A
      • NPS-XY-100D
      • NPS-Z-500B Long Range 500μm Amplified Actuator
      • WP120A Wafer Positioner / Scanner
    • Specialist Stages and OEM Solutions
      • NPS-XYP-250Q
      • NPS-Z-90Q
      • NPS2100-20/NPS2101
  • Microscopic

    Microscope Camera

    • Retiga CCD Family
      • MicroPublisher 6™ CCD Camera
      • Retiga R6 CCD camera
      • Retiga ELECTRO Cooled CCD camera
      • Retiga LUMO CCD camera
    • INFINITY Series Microscopy Camera
      • INFINITY 5 CMOS Microscopy Camera
      • INFINITY 8 CMOS Microscopy Camera
    • Photometrics Scientific Cameras
      • Kinetix sCMOS cameras
      • Prime 95B™ Back-illuminated sCMOS camera
      • Prime BSI™ Back-illuminated sCMOS camera
      • Prime BSI Express sCMOS camera
      • Iris Family sCMOS cameras
      • Retiga E Family Cooled & Low-Noise CMOS camera
      • Moment High Speed CMOS camera
    • MI-Cam CMOS Camera
      • MI-Cam 5 Pro 顯微鏡數位相機
      • MI-Cam 6 顯微鏡數位相機
      • MI-Cam 20 顯微鏡數位相機

    Optical Microscope

    • Evident Microscope
    • Nikon Microscope
    • Microscope Cleaning and Maintenance

    Micrometer/Reticles/Scales

    • Microscope Eyepiece Reticles
    • Stage Micrometers & Calibration
    • TEM Grids (Specimen Support Grids)
    • Precision Apertures
    • Optical Resolution Charts
    • Counting Chambers
    • Inspection Instruments & Magnified Scales
    • Film Cover Slips and Film Reticles
  • Contact
    • Contact Us

Select your language

  • 繁體中文
  • 简体中文
  1. You are here:  
  2. Graticules Optics 產品
  3. 目鏡刻劃片
  4. 正方形網格刻畫片

Graticules Optics
產品服務專線:04-27080265 / 台中
02-89924292 / 台北

Microscope Eyepiece Reticles | Graticules Optics

目鏡刻劃片 | 方形與矩陣網格

Squares and Grids

產品介紹

INTRODUCTION >> Microscope Eyepiece Reticles

Note: These scales may need to be calibrated, according to intended use. There are a number of uses for the grids and squares listed and they will largely depend on the individual user's application.

Eyepiece Scales

Sectoring: A squared graticule might be used for the systematic examination of a specimen. Some of the squared patterns are numbered to aid in the identification of areas of interest. Sectioning is particularly useful for making drawings of specimens onto graph paper. The chess-board type of pattern helps the user to distinguish the position being examined: the darker squares are translucent, while the lighter ones are transparent, avoiding eyestrain in prolonged counting as may be necessary in hematology. These patterns provide the same advantages when used with image analysis and capture devices.

Counting: A squared graticule can be used for counting. Here, the basic principle is that a small area of the specimen is analyzed in order to obtain information about the total area. This minimizes wasteful work, enabling simple analysis of a particular area. An example of this would be the comparison of large to small particles in a specimen. By using the Miller graticule (NE57) only the smaller particles in the small square are counted, the result being multiplied by ten for comparison with the number of larger particles in the large square.

Squared Grids: Squared grids can be used in particle size analysis as simple technical aids where sophisticated image analysis systems are not required. The areas of the particles to be measured can be estimated by simply counting the number of squares occupied by those particles. It is necessary to estimate fractions of a square or make a rule (e.g. count as a square all partly covered squares at the right and bottom sides of the grid, and ignore partly covered squares at the left and upper sides of the squares). This method would only be useful for a fairly crude estimation of a large diameter.

Squared Grids — NE10, NE11, NE34
Simple grids are convenient for making sketches of the observed specimen on graph paper. They are also useful for particle counting.

Indexed Grids — NE10A, NE11A, NE34A, NE71
Useful for particle counting, particularly when reference is needed between workers. Also, they are useful for area of specimen determinations.

Indexed Grids — NE35
Useful for area of specimen determinations, especially rectangular shapes, also for particle counting.

Chessboard Squares — NE15
The dark squares are translucent. Used as an alternative to simple grids for area of specimen determination and particle counting. Alternative light and dark squares help reduce eyestrain.

Squares — NE38
Combines three areas in one for convenience, giving area ratios A:B of 1:3 and B:C of 1:2.

Miller Squares — NE57
The ratio of large to small squares is 9:1. Originally designed for hematology, they can be utilized for rapid counting of any evenly spread field of particle.
References:
1.American J. of Clin. Pathol. Vol. 20, 1950, page 1079. “Time Saving Device For Counting Reticulocyte.” G.Brescher and Schneiderman.
2.Practicle Haemotology. J.D. Dacy. Published by J.A. Churchill. 2nd Edition 1956 page 25.

Whipple Grid — NE29
Originally designed for water particle analysis, but may be used for other aspects of particle counting. Grid shown: Ratio of full square to smallest is 50:1. Area is 2500:1.
Reference:
Microscopy of Drinking Water.

 

包裝樣式

eyepiece-reticle

產品總覽

Products >> Microscope Eyepiece Reticles

 

NE10

NE10 Net Grid 0.5mm Pitch Squares

Eyepiece Reticle with Grid pattern, 0.5mm pitch, covers whole surface

Line Thickness 0.010mm +/-0.002mm
Glass Type and Thickness Soda Lime 1.5mm thick
Diameter Tolerance +0/-0.1mm
Orientation Correct reading through glass
NE10A

NE10A Indexed Grid 0.5mm Pitch Squares

Eyepiece Reticle with Grid pattern, 0.5mm pitch, covers whole surface

Line Thickness 0.012mm +/-0.003mm
Glass Type and Thickness Soda Lime 1.5mm thick
Overall Tolerance +/-0.005mm
Diameter Tolerance +0/-0.1mm
Orientation Correct reading through glass
NE11

NE11 Net Grid 1.0mm Pitch Squares

Eyepiece Reticle with Grid pattern, 1.0mm pitch, covers whole surface

Line Thickness 0.012mm +/-0.002mm
Glass Type and Thickness Soda Lime 1.5mm thick
Diameter Tolerance +0/-0.1mm
Orientation Correct reading through glass
NE11A

NE11A Indexed Grid 1.0mm Pitch Squares

Eyepiece Reticle with Indexed Grid pattern. 10 x 10 grid, 1.0mm pitch squares, marked 1-10 & A-J

Line Thickness 0.012mm +/-0.003mm
Glass Type and Thickness Soda Lime 1.5mm thick
Overall Tolerance +/-0.005mm
Diameter Tolerance +0/-0.1mm
Orientation Correct reading through glass
NE15

NE15 Chessboard 2mm Squares

Eyepiece Reticle with Chessboard pattern, 2.0mm squares, covers whole surface

Square Size 2.0mm
Glass Type and Thickness Soda Lime 1.5mm thick
Chrome Coating Semi Coat - 50% Transmission
Diameter Tolerance Correct reading through glass
Orientation Correct reading through glass
NE29

NE29 Whipple Grid

Whipple Grid 100 squares in 7mm² area (10x10 Grid), centre square further divided into 5 x 5 grid. 10mm² area version also available.

Line Thickness 0.015mm +/-0.003mm & 0.020mm +/-0.003mm CL
Glass Type and Thickness Soda Lime 1.5mm thick
Overall Tolerance +/-0.010mm
Diameter Tolerance +0/-0.1mm
Orientation Correct reading through glass
NE29B

NE29B Whipple Grid

Whipple Grid 100 squares in 10mm² area (10x10 Grid), centre square further divided into 5 x 5 grid. 7mm² standard version also available

Line Thickness 0.015mm, +/-0.003mm & 0.024mm, +/-0.003mm CL
Glass Type and Thickness Soda Lime 1.5mm thick
Overall Tolerance +/-0.010mm
Diameter Tolerance +0/-0.1mm
Orientation Correct reading through glass
NE34

NE34 Net Grid 0.1mm Pitch Squares

Eyepiece Reticle with Grid pattern, 0.1mm Squares , covers whole surface

Line Thickness 0.012mm +/-0.002mm
Glass Type and Thickness Soda Lime 1.5mm thick
Diameter Tolerance +0/-0.1mm
Orientation Correct reading through glass
NE34A

NE34A Indexed Grid 0.1mm Squares

Eyepiece Reticle with Indexed Grid pattern, 10x10 grid, 0.1mm pitch, marked 1-10 & A-J

Line Thickness 0.006mm +/-0.002mm
Glass Type and Thickness Soda Lime 1.5mm thick
Overall Tolerance +/-0.002mm
Diameter Tolerance +0/-0.1mm
Orientation Correct reading through glass
NE35

NE35 Numbered Grid 1mm Square

Eyepiece Reticle with Numbered Grid, 10x10 grid of 1mm Squares, each square numbered from 0 to 99

Line Thickness 0.013mm +/-0.003mm & 0.028mm+/-0.003mm
Glass Type and Thickness Soda Lime 1.5mm thick
Overall Tolerance +/-0.005mm
Diameter Tolerance +0/-0.1mm
Orientation Correct reading through glass
NE38

NE38 Ratio Squares 4, 7, 10mm

Eyepiece Reticle with 3 Squares 10mm, 7mm, 4mm. Area Ratio A:B is 1:3 and B:C is 1:2

Line Thickness 0.010mm +/-0.003mm, 0.02mm +/-0.003mm, 0.030mm +/-0.003mm
Glass Type and Thickness Soda Lime 1.5mm thick
Overall Tolerance +/-0.010mm
Diameter Tolerance +0/-0.1mm
Orientation Correct reading through glass
NE57

NE57 Miller Squares Ratio 9:1

Eyepiece Reticle with Miller Squares pattern, 7x7 mm large square. The ratio of large to small square is 9:1

Line Thickness 0.015mm +/-0.003mm
Glass Type and Thickness Soda Lime 1.5mm thick
Overall Tolerance +/-0.003mm
Diameter Tolerance +0/-0.1mm
Orientation Correct reading through glass
NE57C

NE57C Miller Squares Ratio 10:1

Eyepiece Reticle with Miller Squares pattern, 8x8 mm large square with centered smaller square, ratio 10:1

Line Thickness 0.020mm +/-0.002
Glass Type and Thickness Soda Lime 1.5mm thick
Overall Tolerance +/-0.010mm
Diameter Tolerance +0/-0.1mm
Orientation Correct reading through glass
NE71

NE71 Indexed Grid 0.5mm Squares

Eyepiece Reticle with 20x20 Indexed Grid pattern, 10mm x 10mm grid with 0.5mm squares, marked 1-20, A-T

Line Thickness 0.013mm +/-0.003mm
Glass Type and Thickness Soda Lime 1.5mm thick
Overall Tolerance +/-0.005mm
Diameter Tolerance +0/-0.1mm
Orientation Correct reading through glass
Total-Smart Technology Co., Ltd.

VAT Number:28376870
Contact us: service@totalsmart.com.tw
Business Address:Rm7, 10FL, No.262, Sec. 2, Henan Rd., Xitun Dist., Taichung City 40744, Taiwan (R.O.C.)

Monday – Friday
8:30 am – 5:30 pm CST

MAP: 在 Google 地圖上查看中惠科技有限公司的位置 在百度地圖上查看中惠科技有限公司的位置 在高德地圖上查看中惠科技有限公司的位置 Social Media: 中惠科技有限公司 Youtube 頻道連結 中惠科技有限公司 Facebook 粉絲專頁連結

Taichung Office

TEL: +886-4-27080265  ∣  FAX:+886-4-27080263

Taipai Office

TEL: +886-2-89924292  ∣  FAX:+886-2-89929426

Website

https://www.totalsmart.tw (繁體 ∣ 简体 ∣ English)
https://www.totalsmart.com.tw (繁體)
https://www.totalsmart.com.cn (简体)

Products


Image Analysis System
Image Measurement Software
Image Capture System
Optical Measuring Equipment
Microscope Camera Support
Microscope Automation Integration
Optical Microscope
Micrometer and Reticule Eyepiece
System Integration and Solutions

Support


About Total-Smart
News
Contact Us
E-Office
Maintenance Services
Partner
Request Quote
Suggestions
Complaint Channel

 

Copyright © 2025 Total-Smart Technology Co., Ltd. All Rights Reserved. | Privacy Policy | Terms of Use |