中惠科技有限公司 中惠科技有限公司
  • Image Analysis

    Image-Pro Platform

    • Image-Pro
    • Base Features
    • 2D Capture
    • 2D Measurements
    • 2D Automated Analysis
    • 3D Visualization Analysis
    • AutoQuant Deconvolution

    Image Analysis Solution

    • MA-Pro
      • Grain Size
      • Sphericity
      • Cast Iron
    • IMC Coverage
    • Cleanliness
    • CCL Resin Flow
    • Fiber Cross-Section

    Product Integration

    • Wafer Mapping & Inspection
    • Image Scanning System
    • Stage Conotrol System
    • Extend Depth Of Field
    • Defect Inspection
    • Image Measurement
    • Hardness Testing

    Packages for Image Analysis

    Image-Pro® AI
    Life Science

    Image-Pro® AI
    Materials Science

     

    2D Measure Module
    AI Deep Learning

    2D Measure Module
    Analysis Protocols

    Helpful

    • System Requirements
    • Supported File Formats
    • Version Comparison
  • Optoelectronics

    TOPCON Products

    • 2D Spectroradiometer (SR-5100 Series)
      • SR-5100 2D Spectroradiometer
      • SR-5000 2D Spectroradiometer
    • Spectroradiometer (SR Series)
      • SR-5A Spectroradiometer
      • SR-5AS Spectroradiometer
      • SR-5S Spectroradiometer
      • SR-5 Spectroradiometer
      • SR-UL2 Spectroradiometer
      • SR-NIR Near Infrared Spectroradiometer
    • Luminance Colorimeter (BM Series)
      • BM-7AC Luminance Colorimeter
      • BM-5AC Luminance Colorimeter
      • BM-9A Luminance Meter
    • 2D Luminance Colorimeter (UA Series)
      • UA-200A 2D Luminance Colorimeter
      • UA-10A Uniformity Analyzer
      • UA-20C Luminance & Chromaticity Uniformity Analyzer
      • UA-20Y Luminance Uniformity Analyzer
    • Luminance Colorimeter (RD Series)
      • RD-80SA Luminance Colorimeter
    • Illuminance Meter (IM Series)
      • IM-2D Illuminance Meter
      • IM-600/IM-600M Digital Illuminance Meter
    • Ultraviolet Meter (UVR Series)
      • UVR-T2 Industrial UV Checker
      • UVR-300 UV Radiometer
    • Topcon Calibration Service

    APACER Products

    • Spectroradiometer (Hand-held Type)
      • AL100 / AL110
      • AL250
    • Spectral Irradiance Meter (Hand-held Type)
      • Ai111
      • Ai30S
      • Ai101
      • Ai250
    • Automation Platform for Sprctorradiometer
  • Automation

    Prior Microscope Automation

    • Motorized Stages For Upright Microscopes
      • ProScan H101A Motorized Stages
      • ProScan H101F Motorized Stages
      • ProScan H105 Motorized 6" Travel Stage
      • ProScan H105F Motorized Flat Top 6" Travel Stage
      • ProScan H116 Motorized 8" Travel Stage
      • ProScan H116SPN Motorized 8" Travel Stage with Shuttle Chuck
      • ProScan HWL6AL12 Motorized 8" Travel Stage with Shuttle Chuck
      • ProScan H112 Motorized 12" Travel Stage
      • ProScan H138A Motorized Stage With 8 Slide Capacity
      • ProScan HT1111LC Hardness Testing Motorized Industrial Stage
      • OptiScan ES111 Motorized Stages
    • Motorized Stages For Inverted Microscopes
      • ProScan H117 Motorized Stage
      • ProScan HLD117 Linear Motor Ultra-precision Stage
      • OptiScan ES107 Economical Motorized Stage
    • Physiology Platforms
      •    ── XYZ Deck Physiology Platforms ──   
      • H189 High Precision XYZ Deck
      • HZ106KT1 High Precision XYZ Deck
      • HZ106KT1E High Precision XYZ Deck
      • ProScan HT11 Heavy Duty Motorized Stage
      • ZDP50 Microscope Translation Stage
      •    ── Z Deck Electrophysiology Platform ──   
      • Manual Z Deck Manual XY Stage
      • Motorized Z Deck XY Stepper Motor Stage
      • Encoded Motorized Z Deck
    • Robotic Sample Loaders
      • SL160 Robotic Slide Loader for Microscopy
      • PLW20 Robotic Well Plate Loader System
    • OpenStand® platform
      • OpenStand-V Inverted Microscopy Platform
      • OpenStand-L Large Format Microscopy Platform
      • OpenStand-U Upright Microscopy Platform
      • OpenStand-M Small Format Microscopy Platform

    Prior Imaging Components

    • Focus Mechanisms
      •    ── Piezo-driven Nanoscan ──    
      • NanoScan OP400 Piezo Objective Scanner
      • NanoScan OP800 Piezo Objective Scanner
      • NanoScan SP Piezo Z-Axis Stage
      • WP120A Single Axis Piezo Stage (12" Wafer)
      •     ── Focus Mechanisms ──    
      • FB201 Manual Focusing Block - 29mm
      • FB203 Motorized Focusing Mount - 38mm
      • FB204 / FB205 Stage Focusing Mount - 38mm
      • FB206 Stage Focusing Mount - 38mm
      • FB210 Motorized Focusing Mount - 50mm
      • FB212 Stage Focusing Mount - 50mm
      • PS3H122R Bolt-On Motorized Focus Drive
      • H275LMT Extended Travel Motorized Focus Tower
    • Laser Autofocus
      • PureFocus™850 Laser Autofocus System
    • Controllers & Joysticks
      • ProScan III Universal Multi-axis Controller
      • OptiScan III Affordable 3-Axis Controller
      • ES10ZE Single Axis Focus Controller
      • CS200 Series Joysticks
    • Filter Wheels, Turrets & Shutters
      • HF108 High-Speed 8 Position Filter Wheel
      • HF110 High-Speed 10 Position Filter Wheel
      • HF108IX3 8 Position Filter Wheel for IX3
      • HF6NTK 6 Position Motorized Turret Upgrade Kit for Nikon Ti2
      • HF202HT 25mm High Speed Shutters
    • Light Sources
      • L200 Fluorescence Microscope Illumination

    Queensgate Nanopositioning Devices

    • Nanopositioning Piezo Stages
      • NPS-X-15A/NPS-X-15B Low Profile Fast 20µm Stage
      • NPS-X-28C Titanium Ultra Fast 28µm Stage
      • NPS-Z-15A Ultra Low Drift 15µm Stage
      • SP Mini-500 Compact Sample Positioner
      • NPS-XY-100A
      • NPS-XY-100D
      • NPS-TG-7A Fast Tip Tilt
      • NanoScan OP400
      • NanoScan OP800
      • NanoScan SP Z Series
    • Precision Actuators & Translators
      • DPT-E Closed Loop Piezo Actuators
      • MTP Open Loop Piezo Actuators
      • NPS-Z-15L Ultra High Load Closed Loop 20μm Actuator
      • NPS-Z-500B Long Range 500μm Amplified Actuator
    • Nanosensors
      • NX Series Capacitive Sensors
      • NC Series Capacitive Sensors
    • Nanopositioning Control Electronics
      • NPC-D-5200 Digital Piezo Closed Loop Controller
      • NPC-D-6000 Series Digital Piezo Closed Loop Controller
    • Vacuum Compatible Products
      • DPT-E Closed Loop Piezo Actuators
      • NX Series Capacitive Sensors
      • NC Series Capacitive Sensors
      • NPS-XY-100A
      • NPS-XY-100D
      • NPS-Z-500B Long Range 500μm Amplified Actuator
      • WP120A Wafer Positioner / Scanner
    • Specialist Stages and OEM Solutions
      • NPS-XYP-250Q
      • NPS-Z-90Q
      • NPS2100-20/NPS2101
  • Microscopic

    Microscope Camera

    • Retiga CCD Family
      • MicroPublisher 6™ CCD Camera
      • Retiga R6 CCD camera
      • Retiga ELECTRO Cooled CCD camera
      • Retiga LUMO CCD camera
    • INFINITY Series Microscopy Camera
      • INFINITY 5 CMOS Microscopy Camera
      • INFINITY 8 CMOS Microscopy Camera
    • Photometrics Scientific Cameras
      • Kinetix sCMOS cameras
      • Prime 95B™ Back-illuminated sCMOS camera
      • Prime BSI™ Back-illuminated sCMOS camera
      • Prime BSI Express sCMOS camera
      • Iris Family sCMOS cameras
      • Retiga E Family Cooled & Low-Noise CMOS camera
      • Moment High Speed CMOS camera
    • MI-Cam CMOS Camera
      • MI-Cam 5 Pro 顯微鏡數位相機
      • MI-Cam 6 顯微鏡數位相機
      • MI-Cam 20 顯微鏡數位相機

    Optical Microscope

    • Evident Microscope
    • Nikon Microscope
    • Microscope Cleaning and Maintenance

    Micrometer/Reticles/Scales

    • Microscope Eyepiece Reticles
    • Stage Micrometers & Calibration
    • TEM Grids (Specimen Support Grids)
    • Precision Apertures
    • Optical Resolution Charts
    • Counting Chambers
    • Inspection Instruments & Magnified Scales
    • Film Cover Slips and Film Reticles
  • Contact
    • Contact Us

Select your language

  • 繁體中文
  • 简体中文
  1. You are here:  
  2. Graticules Optics 產品
  3. 校正用標準尺
  4. 單位校正用微米尺/標準片 不分類產品總覽

Graticules Optics
產品服務專線:04-27080265 / 台中
02-89924292 / 台北

Graticules Optics | Stage micrometers And calibration scales grids

單位校正用微米尺/標準片

專業級光學校正用標準片

 

產品簡介

INTRODUCTION>> Microscope Eyepiece Reticles

Graticules Optics公司專為顯微光學系統與影像量測系統提供一系列顯微鏡單位校正專用的載物台微米尺(Stage Micrometer)、校正用標準片(Calibration Standard)、加長型長度刻劃片與網格刻劃片(Long Scale and Grid)等光學尺度單位校正產品,亦可適用於光學相關的測量設備(Measuring Equipment)和計量儀器(Metrology Instrument)。

此外,Graticules Optics為服務客戶,針對旗下所銷售的校正用標準片相關產品,皆可以提供額外付費的長度校正服務並於出廠時隨貨附上可追溯源至UKAS和NPL國際標準的光學校正證書,可滿足NIST、DIN、DKD、Cofrac、Accredia、NABL和全球所有其他國家計量標準的要求,並符合ISO/IEC 17025和ANSI/NCSL Z540- 1實驗室品質管理一切規範。 

 對於精度要求標準較嚴格的ASTM B487標準規範,Graticules Optics仍然可以提供滿足此規範要求的NPL校正證書,確保載物台微米尺(Stage Micrometer)的校正不確定度為0.2µm。

Graticules Optic所有校正用產品均須按照嚴格的製造品質標準進行生產,為保證每一件產品都能夠具備高解析度的光學成像效果和滿足可追溯校正標準的要求,對於每條線段邊緣都會進行精準對位,並控管每條線段厚度的均勻性以確保產品擁有最佳的圖案完整性,絕非一般低價劣質的產品可比擬的。

客製化產品 - 如果您在產品列表中找不到適用的產品型號,歡迎您來電告知需求的詳細規格,我們可以提供協助尋找適合您應用的解決方案。 

 


STAGE MICROMETER校正用微米尺 : S1, S1R, S2, S4, S4R, S8, S11, S12, S16, S18, S20, S21, S22, S48, S78
S-Series:通常具有較短的尺度,例如 10mm/0.1mm、5mm/0.05mm 等,通常包含在塑料盒中,適用於一般的顯微鏡校準。

STAGE MICROMETER Professional Range專業級校正用微米尺: PS1, PS1R, PS4, PS4R, PS5, PS5R, PS6R, PS8, PS12, PS16, PS16R, PS50, PS52P, PS52N, PS78
Professional Range:通常具有較長的尺度,例如 100mm/0.1mm、200mm/1mm 等,適用於高精度的測量和校準。通常包含在木製盒中,以表示其高級校準工具的身份。

English / Imperial Scales英制單位微米尺: S4, S4R, S11, S18, S20, PS4, PS4R, PS52P, PS52N
以英制單位長度標示之尺規。

Long Scales加長型標準尺規: PS100, PS100HS, PS100XO, PS150, PS150HS, PS150XO, PS200HS, PS200XO, PS300, PS300HS, PS300XO, PS500, PS1000, P6, P16
光學長尺為厚度為 6mm 綠色浮法玻璃,適用於低倍率的投影儀、高精度測量和校準、CMM(半自動測量機器)和視覺系統等。

Universal Calibration Slide通用校正標準片: PS20
為多功能的校準片,提供機器視覺與顯微鏡影像分析系統的校準測試片。

HSE/NPL Slide認證標準片: S84, NPL
由英國衛生和安全執行署(HSE)和國家物理實驗室(NPL)認證的檢測用顯微鏡測試片。

Coordinate Graticules經緯座標網格片: S7, S30
用於記錄特定區域的位置,以便測量與重複定位測試之用途。

Calibration Slides for Hardness Testers硬度測試用測微尺: PS25, PS26
用於 Vickers 微克氏、Rockwell 洛氏與 Brinell 勃氏硬度機等。

Counting Grids計數網格: S9, S10, S28, S29, PGR100, PGR300
常用於計算顯微鏡下的細胞數量或培養皿中的菌落數量。

Particle Analysis顆粒大小分析: SG7, DCI20
用於顆粒大小比對與清潔度評估和校準的標準片。

Grain Sizing Calibration晶粒比對標準片: DCI10
標準片上具有 Grain Size 標準規範中所定義的晶粒大小比對圖形。

 

Brochure 顯微鏡校正用微米尺型錄

 

 

顯微鏡校正用微米尺

stage micrometers s series

包裝樣式

calibration-scales
s1-pattern s1

S1

Stage Micrometer with 10mm scale subdivided into 100 divisions of 0.1mm (100µm).
For Transmitted Light.

Line Thickness 0.005mm +/-0.001mm
Scale Length Tolerance +/-0.002mm
Divisional Marker Lengths 2.0mm, 1.6mm, 0.8mm
Mount Black Anodised Aluminium Slide (76mm x 25mm x 1.5mm)
Glass Type and Thickness B270 1mm thick
Orientation Correct on top surface
s1r-pattern s1r

S1R

Stage Micrometer with 10mm scale subdivided into 100 divisions of 0.1mm (100µm).
For Reflected Light.

Line Thickness 0.005mm +/-0.001mm
Scale Length Tolerance +/-0.002mm
Divisional Marker Lengths 2.0mm, 1.6mm, 0.8mm
Mount Black Anodised Aluminium Slide (76mm x 25mm x 1.5mm)
Glass Type and Thickness B270 1mm thick
Orientation Correct on top surface
s2-pattern s2

S2

Stage Micrometer with 5mm scale subdivided into 100 divisions of 0.05mm (50µm).
For Transmitted Light.

Line Thickness 0.005mm +/-0.001mm
Scale Length Tolerance +/-0.0015mm
Divisional Marker Lengths 1.0mm, 0.8mm, 0.4mm
Mount Black Anodised Aluminium Slide (76mm x 25mm x 1.5mm)
Glass Type and Thickness B270 1mm thick
Orientation Correct on top surface
s8-pattern s8

S8

Stage Micrometer with 1mm scale subdivided into 100 divisions of 0.01mm.
For Transmitted Light.

Line Thickness 0.002mm +0.001mm
Scale Length Tolerance +/-0.001mm
Divisional Marker Lengths 0.175mm, 0.125mm, 0.075mm
Mount Black Anodised Aluminium Slide (76mm x 25mm x 1.5mm)
Glass Type and Thickness B270 1mm thick
Orientation Correct on top surface
S4-pattern S4

⚠ English / Imperial Scales

S4

Stage Micrometer with 0.1 inch scale subdivided into 100 divisions of 0.001 inch.
For Transmitted Light.

Line Thickness 0.002mm +0.0015
Scale Length Tolerance +/-0.0025
Divisional Marker Lengths 0.51mm, 0.405mm, 0.205mm
Mount Black Anodised Aluminium Slide (76mm x 25mm x 1.5mm)
Glass Type and Thickness B270 1mm thick
Orientation Correct on top surface
S4R-pattern S4R

⚠ English / Imperial Scales

S4R

Stage Micrometer with 0.1 inch scale subdivided into 100 divisions of 0.001 inch.
For Reflected Light.

Line Thickness 0.002mm +0.0015mm
Scale Length Tolerance 0.0025mm
Divisional Marker Lengths 0.51mm, 0.405mm, 0.205mm
Mount Black Anodised Aluminium Slide (76mm x 25mm x 1.5mm)
Glass Type and Thickness B270 1mm thick
Orientation Correct on top surface
S11-pattern S11

⚠ English / Imperial Scales

S11

Stage Micrometer with 0.005 inch scale subdivided into 50 divisions of 0.0001 inch.
For Transmitted Light.

Line Thickness 0.001mm +0.00025mm/-0.0005mm
Scale Length Tolerance +/-0.00005 Inch
Divisional Marker Lengths 0.043mm, 0.032mm, 0.018mm
Mount Black Anodised Aluminium Slide (76mm x 25mm x 1.5mm)
Glass Type and Thickness B270 1mm thick
Orientation Correct on top surface
S12-pattern S12

S12

Stage Micrometer with 0.1mm scale subdivided into 50 divisions of 0.002mm (2µm).
For Transmitted Light.

Line Thickness 0.001mm +0.00025mm/-0.0005mm
Scale Length Tolerance +/-0.001mm
Divisional Marker Lengths 0.02mm, 0.01mm, 0.006mm
Mount Black Anodised Aluminium Slide (76mm x 25mm x 1.5mm)
Glass Type and Thickness B270 1mm thick
Orientation Correct on top surface
Locating circles Ø0.150mm / Ø0.600mm, both to line centers of 0.005mm line width
S16-pattern S16 S16

S16

Stage Micrometer with Crossed Scales, each 1mm long subdivided into 100 divisions of 0.01mm (10µm).
For Transmitted Light.

Line Thickness 0.002mm +0.001mm
Scale Length Tolerance +/-0.001mm
Divisional Marker Lengths 0.060mm, 0.040mm, 0.020mm
Mount Black Anodised Aluminium Slide (76mm x 25mm x 1.5mm)
Glass Type and Thickness B270 1mm thick
Orientation Correct on top surface
Locating circle Ø3.95mm to line centers of 0.1mm line width
S18-pattern S18 S18-scale

⚠ English / Imperial Scales

S18

Stage Micrometer with 25mm scale in 0.5mm divisions, 5mm in 0.1mm divisions and 1mm in 0.01mm divisions + 1 inch in 0.05 inch divisions, 0.2 inch in 0.01 inch divisions and 0.05 inch in 0.0001 inch divisions.
For Transmitted Light.

Line Thickness 0.0025mm
Slide Dimensions 76mm x 25mm
Glass Type and Thickness SodaLime 1.5mm
S20-pattern S20

⚠ English / Imperial Scales

S20

Stage Micrometer with Metric/Imperial Double Scales. 2mm scale in 0.01mm divisions (10µm) and 0.1 inch scale in 0.0005 inch divisions.
For Transmitted Light.

Line Thickness 0.002mm +/-0.001mm
Scale Length Tolerance +/-0.0015mm
Divisional Marker Lengths 0.175mm, 0.125mm, 0.075mm
Mount Black Anodised Aluminium Slide (76mm x 25mm x 1.5mm)
Glass Type and Thickness B270 1mm thick
Orientation Correct on top surface
S21-pattern S21

S21

Stage Micrometer with Grouped Graduations, 5mm total length scale in 0.5mm divisions, 2mm section subdivided into 0.1mm divisions and final 0.2mm with 0.01mm divisions.
For Transmitted Light.

Line Thickness 0.002mm +0.001mm
Scale Length Tolerance +/-0.0015mm
Divisional Marker Lengths 1.0mm, 0.8mm, 0.6mm, 0.5mm, 0.4mm
Mount Black Anodised Aluminium Slide (76mm x 25mm x 1.5mm)
Glass Type and Thickness B270 1mm thick
Orientation Correct on top surface
S22-pattern S22

S22

Stage Micrometer with 2mm Vertical Scale subdivided into 200 divisions of 0.01mm (10µm).
For Transmitted Light.

Line Thickness 0.002mm +0.001mm
Scale Length Tolerance +/-0.0015mm
Divisional Marker Lengths 2.0mm, 1.6mm, 0.8mm
Mount Black Anodised Aluminium Slide (76mm x 25mm x 1.5mm)
Glass Type and Thickness B270 1mm thick
Orientation Correct on top surface
S48-pattern S48

S48

Stage Micrometer with 1mm scale subdivided into 100 divisions of 0.01mm (10µm). No Coverglass fitted.
For Transmitted Light.

Line Thickness 0.002mm +0.001mm
Scale Length Tolerance +/-0.001mm
Divisional Marker Lengths 0.175mm, 0.125mm, 0.075mm
Mount Black Anodised Aluminium Slide (76mm x 25mm x 1.5mm)
Glass Type and Thickness B270 1mm thick
Orientation Correct on top surface
S78-pattern S78

S78

Stage Micrometer with 1mm scale subdivided into 100 divisions of 0.01mm (10µm).
For Reflected Light.

Line Thickness 0.002mm +0.001
Scale Length Tolerance +/-0.001mm
Divisional Marker Lengths 0.175mm, 0.125mm, 0.075mm
Mount Black Anodised Aluminium Slide (76mm x 25mm x 1.5mm)
Glass Type and Thickness B270 1mm thick
Orientation Correct on top surface

 

PS系列校正用微米尺

stage micrometers professional range

包裝樣式

calibration-scales-professional

 

ps1-pattern ps1

PS1

Stage Micrometer with 10mm scale subdivided into 100 divisions of 0.1mm (100µm).
For Transmitted Light.

Line Thickness 0.005mm +/-0.001mm
Scale Length Tolerance +/-0.002mm
Divisional Marker Lengths 2.0mm, 1.6mm, 0.8mm
Mount Stainless Steel Slide with engraved Serial Number
Glass Type and Thickness B270 1mm thick
Orientation Correct on top surface
ps1r-pattern ps1r

PS1R

Stage Micrometer with 10mm scale subdivided into 100 divisions of 0.1mm (100µm).
For Reflected Light.

Line Thickness 0.005mm +/-0.001mm
Scale Length Tolerance +/-0.002mm
Divisional Marker Lengths 2.0mm, 1.6mm, 0.8mm
Mount Stainless Steel Slide with engraved Serial Number
Glass Type and Thickness B270 1mm thick
Orientation Correct on top surface
PS4-pattern PS4

⚠ English / Imperial Scales

PS4

Stage Micrometer with 0.1 inch scale subdivided into 100 divisions of 0.001 inch.
For Transmitted Light.

Line Thickness 0.002mm +/-0.0015mm
Scale Length Tolerance +/-0.0025mm
Divisional Marker Lengths 0.51mm, 0.405mm, 0.205mm
Mount Stainless Steel Slide with engraved Serial Number
Glass Type and Thickness B270 1mm thick
Orientation Correct on top surface
PS4R-pattern PS4R

⚠ English / Imperial Scales

PS4R

Stage Micrometer with 0.1 inch scale subdivided into 100 divisions of 0.001 inch.
For Reflected Light.

Line Thickness 0.002mm +0.0015mm
Scale Length Tolerance +/-0.0025mm
Divisional Marker Lengths 0.51mm, 0.405mm, 0.205mm
Mount Stainless Steel Slide with engraved Serial Number
Glass Type and Thickness B270 1mm thick
Orientation Correct on top surface
PS5-pattern PS5

PS5

Stage Micrometer with 20mm scale subdivided into 2000 divisions of 0.01mm (10µm).
For Transmitted Light.

Line Thickness 0.002mm +0.001mm
Scale Length Tolerance +/-0.004mm
Divisional Marker Lengths 0.35mm, 0.30mm, 0.20mm, 0.15mm, 0.10mm
Mount Stainless Steel Slide with engraved Serial Number
Glass Type and Thickness B270 1mm thick
Orientation Correct on top surface
PS5R-pattern PS5R

PS5R

Stage Micrometer with 20mm scale subdivided into 2000 divisions of 0.01mm (10µm).
For Reflected Light.

Line Thickness 0.003mm +0.001mm
Scale Length Tolerance +/-0.004mm
Divisional Marker Lengths 0.35mm, 0.30mm, 0.20mm, 0.15mm, 0.10mm
Mount Stainless Steel Slide with engraved Serial Number
Glass Type and Thickness B270 1mm thick
Orientation Correct on top surface
PS6R-pattern

圖片僅供參考

PS6R

Stage Micrometer with 6mm scale subdivided into 60 divisions of 0.1mm (100µm).
For Reflected Light.

Line Thickness 0.005mm +/-0.001mm
Scale Length Tolerance +/-0.002mm
Divisional Marker Lengths 2.0mm, 1.6mm, 0.8mm
Mount Stainless Steel Slide with engraved Serial Number
Glass Type and Thickness B270 1mm thick
Orientation Correct on top surface
PS8-pattern PS8

PS8

Stage Micrometer with 1mm scale subdivided into 100 divisions of 0.01mm (10µm).
For Transmitted Light.

Line Thickness 0.002mm +0.001mm
Scale Length Tolerance +/-0.001mm
Divisional Marker Lengths 0.175mm, 0.125mm, 0.075mm
Mount Stainless Steel Slide with engraved Serial Number
Glass Type and Thickness B270 1mm thick
Orientation Correct on top surface
PS12-pattern PS12

PS12

Stage Micrometer with Scale 0.1mm (100um) length subdivided into 50 divisions of 0.002mm (2µm).
For Transmitted Light.

Line Thickness 0.001mm +0.00025mm/-0.0005mm
Scale Length Tolerance +/-0.001mm
Divisional Marker Lengths 0.02mm, 0.01mm, 0.006mm
Mount Stainless Steel Slide with engraved Serial Number
Glass Type and Thickness B270 1mm thick
Orientation Correct on top surface
Locating circles Ø0.150mm / Ø0.600mm, both to line centers of 0.005mm line width
PS16-pattern PS16_central_patternPS16

PS16

Stage Micrometer with Crossed Scales, each 1mm long subdivided into 100 divisions of 0.01mm (10µm).
For Transmitted Light.

Line Thickness 0.002mm +0.001mm
Scale Length Tolerance +/-0.001mm
Divisional Marker Lengths 0.060mm, 0.040mm, 0.020mm
Mount Stainless Steel Slide with engraved Serial Number
Glass Type and Thickness B270 1mm thick
Orientation Correct on top surface
Locating circle Ø3.95mm to line centers of 0.1mm line width
PS16R-patternPS16R PS16R

PS16R

Stage Micrometer with Crossed Scales, each 1mm long subdivided into 100 divisions of 0.01mm (10µm).
For Reflected Light.

Line Thickness 0.002mm +0.001mm
Scale Length Tolerance +/-0.001mm
Divisional Marker Lengths 0.060mm, 0.040mm, 0.020mm
Mount Stainless Steel Slide with engraved Serial Number
Glass Type and Thickness B270 1mm thick
Orientation Correct on top surface
PS6R-pattern

PS50

Long Calibration Scale with 50mm Scale subdivided into 500 divisions of 0.1mm (100µm).

Line Thickness 0.012mm
Overall Accuracy Within 0.007mm
Glass Type and Thickness B270 1mm thick
Slide Dimensions 75mm x 75mm
PS52P-pattern PS52P

⚠ English / Imperial Scales

PS52P

Dual Micrometer Calibration Slide with 50mm in 0.1mm (100µm) divisions and 2 inch in 0.005 inch divisions.
For Transmitted Light.

Line Thickness 0.012mm +/-0.002mm
Scale Length Tolerance +/-0.005mm
Glass Type and Thickness B270 1mm thick
Orientation Correct on top surface
Slide Dimensions 76mm x 25mm
PS52N-pattern

⚠ English / Imperial Scales

PS52N

Dual Micrometer Calibration Slide with 50mm in 0.1mm (100µm) divisions and 2 inch in 0.005 inch divisions.
For Reflected Light.

Line Thickness 0.012mm +/-0.002mm
Scale Length Tolerance +/-0.005mm
Glass Type and Thickness B270 1mm thick
Orientation Correct on top surface
Slide Dimensions 76mm x 25mm
PS78-pattern PS78

PS78

Stage Micrometer with 1mm scale subdivided into 100 divisions of 0.01mm (10µm).
For Reflected Light.

Line Thickness 0.002mm +/-0.001mm
Scale Length Tolerance +/-0.001mm
Divisional Marker Lengths 0.175mm, 0.125mm, 0.075mm
Mount Stainless Steel Slide with engraved Serial Number
Glass Type and Thickness B270 1mm thick
Orientation Correct on top surface

 

加長型刻度片

long scales ps ps xo series
ps100

PS100

Long Glass Scale with 100mm scale subdivided into 1000 divisions of 0.1mm (100µm)

Line Thickness 0.03mm
Glass Type and Thickness Green Float 6mm thick
Dimensions 140mm x 30mm
Overall Accuracy Within 0.015mm
ps100hs

PS100HS

High Definition Long Glass Scale with 100mm scale subdivided into 100 divisions of 1mm.

Line Thickness 0.07mm
Glass Type and Thickness Green Float 6mm thick
Dimensions 140mm x 30mm
Overall Accuracy Within 0.007mm
ps100xo-pattern ps100xo

PS100XO

High Definition Long Scale with 100mm scale subdivided into 1000 divisions of 0.1mm (100µm) + cross and dot series at 10mm centres.

Line Thickness 0.03mm
Glass Type and Thickness Green Float 6mm thick
Dimensions 140mm x 30mm
Overall Accuracy Within 0.007mm
Divisional Marker Lengths 1.5mm. 2.4mm, 3.4mm, 5.0mm
PS150

PS150

Long Glass Scale with 150mm scale subdivided into 1500 divisions of 0.1mm (100µm).

Line Thickness 0.03mm
Glass Type and Thickness Green Float 6mm thick
Dimensions 190mm x 30mm
Overall Accuracy Within 0.015mm
PS150HS

PS150HS

High Definition Long Glass Scale with 150mm scale subdivided into 150 divisions of 1mm.

Line Thickness 0.07mm
Glass Type and Thickness Green Float 6mm thick
Dimensions 190mm x 30mm
Overall Accuracy Within 0.008mm
PS150XO-pattern PS150XO

PS150XO

High Definition Long Scale with 150mm scale subdivided into 1500 divisions of 0.1mm (100µm) + cross and dot series at 10mm centres.

Line Thickness 0.03mm
Glass Type and Thickness Green Float 6mm thick
Dimensions 190mm x 30mm
Overall Accuracy Within 0.007mm
Divisional Marker Lengths 1.5mm, 2.4mm, 3.4mm, 5.0mm
PS200HS

PS200HS

High Definition Long Glass Scale with 200mm scale subdivided into 200 divisions of 1mm.

Line Thickness 0.07mm
Glass Type and Thickness Green Float 6mm thick
Dimensions 240mm x 30mm
Overall Accuracy Within 0.008mm
PS200XO-pattern PS200XO

PS200XO

High Definition Long Scale with 200mm scale subdivided into 2000 divisions of 0.1mm (100µm) + cross and dot series at 10mm centres.

Line Thickness 0.03mm
Glass Type and Thickness Green Float 6mm thick
Dimensions 240mm x 30mm
Overall Accuracy Within 0.007mm
Divisional Marker Lengths 1.5mm, 2.4mm, 3.4mm, 5.0mm
PS300

PS300

Long Glass Scale with 300mm scale subdivided into 3000 divisions of 0.1mm (100µm).

Line Thickness 0.03mm
Glass Type and Thickness Green Float 6mm thick
Dimensions 340mm x 30mm
Overall Accuracy Within 0.025mm
PS300HS

PS300HS

High Definition Long Glass Scale with 300mm scale subdivided into 300 divisions of 1mm.

Line Thickness 0.07mm
Glass Type and Thickness Green Float 6mm thick
Dimensions 340mm x 30mm
Overall Accuracy Within 0.008mm
PS300XO-pattern PS300XO

PS300XO

High Definition Long Scale with 300mm scale subdivided into 3000 divisions of 0.1mm (100µm) + cross and dot series at 10mm centres.

Line Thickness 0.03mm
Glass Type and Thickness Green Float 6mm thick
Dimensions 340mm x 30mm
Overall Accuracy Within 0.007mm
Divisional Marker Lengths 1.5mm, 2.4mm, 3.4mm, 5.0mm
PS500

PS500

Long Glass Scale with 500mm scale subdivided into 500 divisions of 1mm.

Line Thickness 0.07mm
Glass Type and Thickness Green Float 6mm thick
Dimensions 540mm x 30mm
Overall Accuracy Within 0.025mm
PS1000

PS1000

Long Glass Scale with 1000mm scale subdivided into 1000 divisions of 1mm.

Line Thickness 0.07mm
Glass Type and Thickness Green Float 6mm thick
Dimensions 1040mm x 30mm
Overall Accuracy Within 0.025mm
P6

P6

Glass Scale for in-contact measurements, 100mm scale length in 0.1mm (100µm) divisions.

Line Thickness 0.025mm
Glass Type and Thickness Optical Glass 3mm thick
Dimensions 125mm x 25mm
P16

P16

Glass Scale for in-contact measurements, 300mm scale length in 0.5mm (500µm) divisions.

Line Thickness 0.10mm nominally
Glass Type and Thickness Green Float Glass 6mm thick
Dimensions 340mm x 30mm

 

通用校正標準片

Universal Calibration Slide
PS20-pattern PS20

PS20

Calibration Slide for machine vision and image analysis systems. 13 different image areas. Now available in 1mm thick version (05B01095T) for 3D Scanner systems

Glass Type and Thickness Green Float 6mm thick
Slide Dimensions 76mm x 25mm
Accuracy Tolerance Feature size/Tolerance: ≤ 10um is 0.5um, 10-50um is 1.0um, 50-127um is 1.3um, 127-250um is 1.9um, > 250um is 2.54um
Optical Density >2.5

 

HSE/NPL Slide認證標準片

Coordinate Graticules
S84-pattern S84

S84

Phase Contrast Test Slide for checking resolution of microscopes used for Asbestos Analysis Band 5. Includes Certificate.

Description This test slide is made in the UK under license from the National Physical Laboratory. The purpose of the slide is to provide a standard means to check the performance of phase microscopes prior to the analysis of asbestos. The pattern consists of seven bands of twenty lines with widths ranging from 0.25 microns to 1.1 microns. This slide is the band 5 version where microscopes need to be able to fully view band 5 and partially view band 6.

Each slide is fully tested and approved by the Health & Safety Laboratory, and issued with a certificate.
Band 5
NPL

NPL

Image Analysis Standard, also known as reference stage graticule. Supplied with NPL certificate of calibration.

Slide Dimensions 75mm x 25mm

 

經緯座標網格片

Coordinate Graticules

包裝樣式

calibration-scales-coordinate

 

S7-pattern S7

S7

S7 England Finder Slide for recording the position of areas of interest. 9045 uniquely indexed locations.

Description The England Finder is a glass microscope slide with a uniquely indexed grid pattern that allows individual areas of interest to be referenced.

All England Finders produced by Graticules Optics are identical. The purpose of the slide is to give microscopists an easy method of recording the position of a particular area of interest, so that the same position can be re-located at a later date, or by another person in another laboratory, or when using an England Finder in another microscope.
Slide Dimensions 76mm x 26mm
S30-pattern

S30

S30 Finder Slide. Pattern as S7 but covers only a 5mmx5mm area

Slide Dimensions 76mm x 26mm

 

硬度測試用測微尺

Calibration Slides for Hardness Testers

包裝樣式

calibration-scales-hardness

 

PS25-pattern PS25

PS25

Reflected Light Calibration Slide with Diamond shapes and Scales for calibrating Vickers and Rockwell Hardness Testers.

Line Thickness 0.010mmmm +/-0.0015mm
Glass Type and Thickness B270 1mm thick
Scale Length Tolerance +/-0.0015mm
Mount Stainless Steel Slide with engraved Serial Number
Diamonds Size (Point to Point) 0.02mm, 0.05mm, 0.1mm, 0.2mm, 0.3mm, 0.5mm
Orientation Correct on top surface
PS26-pattern PS26

PS26

Reflected Light Calibration Slide with Circle shapes and Scales for calibrating Brinell Hardness Testers.

Line Thickness 0.010mm +/-0.0015mm
Glass Type and Thickness B270 1mm thick
Scale Length Tolerance +/-0.0015mm
Mount Stainless Steel Slide with engraved Serial Number
Circle Sizes (Diameter) 0.3mm, 0.7mm, 1.0mm, 2.5mm, 5.0mm

 

計數網格

Counting Grids
S9-pattern S9

S9

Counting Grid slide with 10x10 Grid of 0.1mm (100µm) squares. For Transmitted Light.

Line Thickness 0.005mm
Glass Type and Thickness B270 1mm thick
Overall Tolerance +/-0.002mm
Mount Black Anodised Aluminium Slide (76mm x 25mm x 1.5mm)
Orientation Correct on top surface
S10-pattern S10

S10

Counting Grid slide with 10x10 Grid of 0.05mm (50µm) squares. For Transmitted Light.

Line Thickness 0.003mm
Glass Type and Thickness B270 1mm thick
Overall Tolerance +/-0.002mm
Mount Black Anodised Aluminium Slide (76mm x 25mm x 1.5mm)
Orientation Correct on top surface
S28-pattern S28

S28

Counting Grid Slide with 20x20 grid of 0.01mm (10µm) squares. For Transmitted Light.

Line Thickness 0.002mm +0.001mm / 0.003mm +0.001mm Centre Line
Glass Type and Thickness B270 1mm thick
Overall Tolerance +/-0.0015mm
Mount Black Anodised Aluminium Slide (76mm x 25mm x 1.5mm)
Orientation Correct on top surface
S29-pattern S29

S29

Counting Grid Slide with 150x150 grid of 0.01mm (10µm) squares. For Transmitted Light.

Line Thickness 0.002mm +0.001mm / 0.003mm +0.001mm Centre Line
Glass Type and Thickness B270 1mm thick
Overall Tolerance +/-0.0015mm
Mount Black Anodised Aluminium Slide (76mm x 25mm x 1.5mm)
Orientation Correct on top surface
PGR100-pattern PGR100

PGR100

Two Dimensional Grid Ruled Area 100 x 100mm.

Line Thickness 0.008mm
Dimensions 120mm x 120mm x 6mm thick
Linear Straightness Within 0.002mm
Angular Accuracy Within 5 seconds
PGR300-pattern PGR300

PGR300

Highly accurate glass calibration plate. 30 x 30 image of 10mm squares with index markings. If you need traceability of measurement, we can also include internationally traceable certificates of calibration: Simple x-y measurements or a fully measured coordinate map.

Glass Type 355.6mm x 355.6mm x 4.8mm Thick Soda Lime Glass with Low Reflective Chrome Image
Overall Image Accuracy Within 1um
Line Width 5 um

 

顆粒大小分析

Particle Analysis
SG7-pattern SG7SG7_test_cert_pageSG7_test_cert_page_2

SG7

Calibration Test Slide for Particle Sizing with 200 particles of various shapes and sizes.

Glass Type and Thickness B270 1mm thick
Mount Black Anodised Aluminium Slide (76mm x 25mm x 1.5mm)
DCI20-pattern

DCI20

Calibration Slide with approx. 8,000 particles of different sizes and shapes, evenly dispersed in a 45mm diameter circle. Including a measurement report.

Material and Thickness 1mm thick white media
Dimensions 75mm x 50mm

 

晶粒比對標準片

Grain Sizing Calibration
DCI10-pattern DCI10-Layout

DCI10

ASTM Grain Size chart reproduction from rating 1.0 to 8.0. Including a measurement report.

Material and Thickness Glass 1mm thick
Dimensions 75mm x 25mm
Total-Smart Technology Co., Ltd.

VAT Number:28376870
Contact us: service@totalsmart.com.tw
Business Address:Rm7, 10FL, No.262, Sec. 2, Henan Rd., Xitun Dist., Taichung City 40744, Taiwan (R.O.C.)

Monday – Friday
8:30 am – 5:30 pm CST

MAP: 在 Google 地圖上查看中惠科技有限公司的位置 在百度地圖上查看中惠科技有限公司的位置 在高德地圖上查看中惠科技有限公司的位置 Social Media: 中惠科技有限公司 Youtube 頻道連結 中惠科技有限公司 Facebook 粉絲專頁連結

Taichung Office

TEL: +886-4-27080265  ∣  FAX:+886-4-27080263

Taipai Office

TEL: +886-2-89924292  ∣  FAX:+886-2-89929426

Website

https://www.totalsmart.tw (繁體 ∣ 简体 ∣ English)
https://www.totalsmart.com.tw (繁體)
https://www.totalsmart.com.cn (简体)

Products


Image Analysis System
Image Measurement Software
Image Capture System
Optical Measuring Equipment
Microscope Camera Support
Microscope Automation Integration
Optical Microscope
Micrometer and Reticule Eyepiece
System Integration and Solutions

Support


About Total-Smart
Contact Us
E-Office
Maintenance Services
Partner
Request Quote
Suggestions
Complaint Channel

 

Copyright © 2025 Total-Smart Technology Co., Ltd. All Rights Reserved. | Privacy Policy | Terms of Use |