| CCD Sensor |
| Sensor Type |
Sony ICX-825 Scientific Interline CCD (Monochrome) |
| CCD Array |
1360 x 1024 |
| Pixel Size |
6.45μm x 6.45μm |
| Sensor Dimensions |
8.8mm x 6.6mm (11mm diagonal) |
| Peak Quantum Efficiency |
75% at 600nm |
| Full Well Capacity |
>11,000e- single pixel |
| Camera |
| Digital Output |
14-bit with 50MHz readout |
| Digitization Rate |
USB3: 50MHz high frame rate |
| Read Noise |
< 5.5e- RMS with 50 Hz readout
|
| Frame Rate |
22 fps (full resolution); 31 fps (binned 2x2) |
| Exposure Time Range |
25 µs - 5 sec |
| Supported Binning Modes |
1x1, 2x2, 4x4, 6x6, 8x8, 12x12, 16x16 |
| Dark Current Rate (typical) |
0.036 e/p/s at +15ºC regulated
|
| Sensor Cooling |
0ºC stabilized at 22ºC ambient; Thermoelectric cooling with forced air |
| Intelligent Quantification Features (monochrome only) |
DPC- Defective Pixel Correction |
| Interfacing |
| Computer Platforms/ Operating Systems |
Windows 7 (64 bit), Windows 8 (64 bit), Windows 10 (64 bit) Refer to the QImaging website for the latest list of minimum computer recommendations |
| Digital Interface |
USB 3.0 |
| Triggering I/O Signals |
Trigger In, Expose Out, End-of-Frame, Shutter Out |
| Supported Triggering Modes |
Trigger First, Strobe, Bulb |
| Mechanical |
| Optical Interface |
1”, C-mount optical format |
| Mounting Hole Thread Size |
1/4” - 20 thread, 4 sides |
| Camera Dimensions |
98.4mm x 76mm x 76mm (length x width x height) |
| Weight |
1.55lb, 0.72kg |
| Power Requirement |
7.5V DC, 2.5A |
