QImaging 產品服務專線:04-27080265

QImaging Retiga R3 ™ CCD 科研级显微镜专用数位相机
不用再苦恼如何决择显微镜拍照相机到底要选高画素或是快速,其实你可以同时拥有不一样的数位影像拍照体验

QIMAGING Retiga R3 ™ CCD

Retiga R3 TM CCD是一款具备科研级技术规格的数位相机,采用最新Sony ICX674 CCD Sensor,制冷式晶片整合了Intelligent Quantification TM 智慧图像处理技术,可校正感光晶片上有缺陷的像素并能消除微弱光成像时的杂讯和暗电流,藉以提高相机的动态范围进而提升影像检测与量化的极限。

USB3.0高速传输介面,为标准即插即用装置,相机的读出速率可达 50 MHz,在全解析成像时,画面更新率为13.7 fps,在Binning 2 x 2模式下画面更新率可达21.9 fps,结合相机的超高灵敏度特性,不论是静态影像高解析度拍照或是大视野组织切片拼图扫描、活细胞动态萤光撷取等应用,都可以轻松胜任,满足大多数对高速、高灵敏度成像的显微拍照应用需求。

Ocular™是QImaging全新的影像拍照软体,专为科学应用设计,操作界面简洁直观,无需培训就能立即上手使用。

产品特色
  • 75%的峰值量子效率配合低电子杂讯设计,可以探测到工业相机无法探测到的弱信号
  • 延长曝光时间或使用像素融合(Binning)技术,可以使用深度制冷的晶片探测到极弱的信号
  • 50 MHz双通道读出端口提高了相机画面更新率,让对焦速度和拍摄样品更加流畅
  • 减少照明光对样品的光漂白(Photobleaching )和光毒性(Phototoxicity)
  • Intelligent Quantification™智慧图像处理技术,采用先进的即时FPGA算法来获得更高品质的影像
  • 全新Ocular拍照软体
产品应用
  • 静态影像或活细胞(Live Cell)动态影像拍照
  • 时间序列拍照(Time-lapse, 缩时拍照 / 间隔时间拍照) 
  • 生物玻片影像扫描(Slide Scanning)
产品型号
Retiga R3 Scientific CCD Camera
  • Model: 01-RET-R3-R-M-14-C (monochrome)
  • Model: 01-RET-R3-R-CLR-14-C (color)
产品规格
CCD Sensor
Sensor Type Sony ICX-674 Scientific Interline CCD (Monochrome or Color)
CCD Array 1920 x 1460
Pixel Size 4.54μm x 4.54μm
Sensor Dimensions 8.8mm x 6.6mm (11mm diagonal)
Peak Quantum Efficiency 75% at 600nm
Full Well Capacity >9,000e- single pixel (>20,000e- with on-chip binning)
Camera
Digital Output 14 bit
Digitization Rate USB3: 50MHz high frame rate
Read Noise < 5.5e- RMS
Frame Rate 14.4 fps (full resolution); 24.1 fps (binned 2x2)
Exposure Time Range 25 µs - 60 min
Supported Binning Modes 1x1, 2x2, 4x4, 6x6, 8x8, 12x12, 16x16
Dark Current Rate (typical) 0.0008 e/p/s at -12ºC regulated
Sensor Cooling -12ºC stabilized at 22ºC ambient; Thermoelectric cooling with forced air
Intelligent Quantification Features (monochrome only) Defect correction (nearest neighbor); Dynamic Dark Frame subtraction
Interfacing
Computer Platforms/ Operating Systems Windows 7 (64 bit), Windows 8 (64 bit), Windows 10 (64 bit) Refer to the QImaging website for the latest list of minimum computer recommendations
Digital Interface USB 3.0
Triggering I/O Signals Trigger In, Expose Out, End-of-Frame, Shutter Out
Supported Triggering Modes Trigger First, Strobe, Bulb
Mechanical
Optical Interface 1”, C-mount optical format
Mounting Hole Thread Size 1/4” - 20 thread, 4 sides
Camera Dimensions 98.4mm x 76mm x 76mm (length x width x height)
Weight 1.55lb, 0.72kg
Power Requirement 7.5V DC, 2.5A
产品资源

search_offcanvas

X

Right Click

禁止任意複製或拷貝網站內容!