选择你的语音
02-89924292 / 台北
顯微鏡專用目鏡刻劃片
產品簡介
INTRODUCTION >> Microscope Eyepiece ReticlesGraticules Optics提供超過800多種刻畫片產品，是目前所有製造商中擁有最大的顯微鏡接目鏡光學刻畫/網格圖案樣式產品提供者，大多數產品都可以提供現貨供應銷售服務，產品尺寸適合各廠牌的顯微鏡和放大鏡。如果您需要特殊圖案樣式或尺寸，Graticules Optics也可以額外提供滿足您成本效益考量的客製化服務。
Horizontal and Vertical Scales水平與垂直刻度 : NE1 NE2 NE5 NE20 NE28 NE31 NE41 NE120 NE7 NE7N NE77 NE777
此類刻劃片有精確的水平和垂直刻度，用於目鏡觀察來測量和比對目標尺寸是否符合需求大小。
Crosslines對位線段與十字線 : NE8 NE17 NE18 NE50 NE53 NE54 NE56 NE70 NE72 NE81 NE82
具有簡單置中線段，方便於目鏡觀察中快速將觀察目標對齊在標線上。
Circle Gauges and Protractors圓規與量角器 : NE19 NE22 NE42 NE43 NE44 NE47 NE48 NG5 NE25 NE45
是用於測量和校準圓形物體和角度的工具。
Metallurgy Grain Sizing冶金晶粒尺寸 : G41 G42 G44 G45 G46 NG60 NG61
用於金相測量應用中的晶粒大小比對法。
Squares and Grids方型與矩陣表格 : NE10 NE10A NE11 NE11A NE15 NE29 NE29B NE34 NE34A NE35 NE38 NE57C NE71 G47 G54 G55 NG14 NG21
用於快速定位和標識特定區域，與顯微鏡觀察目標物體的微小距離，如細胞大小或微粒分佈。
Particle Sizing Distribution顆粒尺寸分佈 : NG1 NG2 NG10 NG12
用於進行顯微鏡觀察目標時來比對物體的尺寸。
Specialist Designs特定圖案 : G22 G23 G24 G25 G48 G49 G50 G57 NE57 GW3 NG30 NG52 NGM1 NGW1 NGW2
特定圖案提供指定的分析應用圖譜。
尺規刻度片 / 目鏡測微尺
horizontal and vertical scales包裝樣式
NE1
Eyepiece Reticle with 10mm Horizontal Micrometer Scale subdivided into 100 divisions of 0.1mm (100µm)
NE2
Eyepiece Reticle with 10mm Vertical Micrometer Scale subdivided into 100 divisions 0.1mm (100µm)
NE5
Eyepiece Reticle with 5mm Horizontal Micrometer Scale subdivided into 100 divisions of 0.05mm (500µm)
NE20
Eyepiece Reticle with 0.1 inch Horizontal Scale subdivided into 100 divisions of 0.001 inch
NE28
Eyepiece Reticle with 1mm Horizontal Scale subdivided into 100 divisions of 0.01mm (10µm)
NE31
Eyepiece Reticle with 0.5 inch Horizontal Scale subdivided into 100 divisions of 0.005 inch
NE41
Eyepiece Reticle with 10mm Horizontal Scale subdivided into 200 divisions of 0.05mm (50µm)
NE120
Eyepiece Reticle with 20mm Horizontal Micrometer Scale subdivided into 200 divisions of 0.1mm (100µm)
NE7
Eyepiece Reticle with 10mm Horizontal Micrometer Scale subdivided into 100 divisions of 0.1mm (100µm) with centered Crossline for alignment
NE7N
Eyepiece Reticle with 10mm Horizontal Micrometer Scale subdivided into100 divisions of 0.1mm (100µm) with centered Crossline for alignment and 10mm Square
NE77
Eyepiece Reticle with 5mm Horizontal Micrometer Scale subdivided into 100 divisions of 0.05mm (50µm), with centered crosslines
NE777
Eyepiece Reticle with 0.5 inch Horizontal Micrometer Scale subdivided into 100 divisions of 0.005 inch with centered Crossline
線段與十字目鏡刻劃片
lines and crosslines包裝樣式
NE8
Eyepiece Reticle with Crosslines, centrally positionned, 0.020mm (20µm) nominal line width
NE17
Eyepiece Reticle with 10mm Crossed Micrometer Scales subdivided into 100 divisions of 0.1mm (100µm)
NE18
Eyepiece Reticle with 5mm Crossed Micrometer Scales subdivided into 100 divisions of 0.05mm (50µm)
NE50
Eyepiece with Single Horizontal Line. Nominal Line Width 0.02mm, line extends to the full width of the reticle.
NE53
Eyepiece Reticle with two Vertical gauge lines 0.1mm apart and a single horizontal line. Lines extend to the edge of the reticle
NE54
Eyepiece Reticle with two Vertical gauge lines 0.2mm apart and a single horizontal line.Lines extend to the edge of the reticle
NE56
Eyepiece Reticle with Broken (dashed) Horizontal and vertical lines, centrally positioned. Dashed lines extend to the edge of the Reticle.
NE70
Eyepiece Reticle with 0.8 inch Crossed scales subdivided into 400 divisions of 0.002 inch
NE72
Eyepiece Reticle with 20mm Crossed micrometer scales subdivided into 200 divisions of 0.1mm (100µm)
NE81
Eyepiece Reticle with Crosslines, centrally positionned, 0.04mm (400µm) line width
NE82
Eyepiece Reticle with Crosslines, centrally positionned, 0.005mm (5µm) line width
圓規與量角器
Circle Gauges and Protractors包裝樣式
NE19
Eyepiece Reticle with 10 Pairs of Gauge Lines in a 10mm image area. Each Pair is proportional to its adjacent number. Size of smallest pair about 0.1mm (100µm)
NE22
Eyepiece Reticle with 24 Concentric Circles with clear segment, ranging in size 0.5mm to 12mm diameter in 0.5mm steps.
NE42
Eyepiece Reticle with 10 Concentric Circles ranging in size from 0.25mm to 2.5mm diameter in 0.25mm steps. 5th circle has dashed lines
NE43
Eyepiece Reticle with 10 Concentric Circles ranging in size from 0.5mm to 5mm diameter in 0.5mm steps. 5th circle has dashed lines
NE44
Eyepiece Reticle with 10 Concentric Circles ranging in size from 1mm to 10mm diameter in 1mm steps. 5th circle has dashed lines
NE47
Eyepiece Reticle with 10 Concentric Circles ranging in size from 2mm to 20mm diameter in 2mm steps. 5th circle has dashed lines
NE48
NE48 Concentric Circles 1mm-10mm + Crossline Scales
NG5
Eyepiece Reticle designed to extend the sizing range of the Globes/Circles reticles
NE25
Eyepiece Reticle with 180º Protractor, 10mm diameter subdivided into 1º divisions. Also has a 10mm horizontal scale with 0.5mm divisions.
NE45
Eyepiece Reticle with 360º Protractor with 1º divisions and 10mm diameter. Centrally located.
冶金晶粒尺寸
Metallurgy Grain Sizing包裝樣式
G41
Eyepiece Reticle for Grain Sizing Austenite
G42
Eyepiece Reticle with Grain Sizing pattern to ASTM E112. Circular pattern with segments to represent various grain sizes.
G44
Eyepiece Reticle to ASTM E45
G45
Eyepiece Reticle to ASTM E19-46
G46
Eyepiece Reticle to ASTM E19-46 Root2. Circular pattern with 10 different segments each with a progressively smaller pattern for grain size analysis.
NG60
Grain Sizing Reticle to EN10247
NG61
Eyepiece Reticle for the determination of non-metallic inclusion content of steel.
方型與矩陣表格
Squares and Grids包裝樣式
NE10
Eyepiece Reticle with Grid pattern, 0.5mm pitch, covers whole surface
NE10A
Eyepiece Reticle with Grid pattern, 0.5mm pitch, covers whole surface
NE11
Eyepiece Reticle with Grid pattern, 1.0mm pitch, covers whole surface
NE11A
Eyepiece Reticle with Indexed Grid pattern. 10 x 10 grid, 1.0mm pitch squares, marked 1-10 & A-J
NE15
Eyepiece Reticle with Chessboard pattern, 2.0mm squares, covers whole surface
NE29
Whipple Grid 100 squares in 7mm² area (10x10 Grid), centre square further divided into 5 x 5 grid. 10mm² area version also available.
NE29B
Whipple Grid 100 squares in 10mm² area (10x10 Grid), centre square further divided into 5 x 5 grid. 7mm² standard version also available
NE34
Eyepiece Reticle with Grid pattern, 0.1mm Squares , covers whole surface
NE34A
Eyepiece Reticle with Indexed Grid pattern, 10x10 grid, 0.1mm pitch, marked 1-10 & A-J
NE35
Eyepiece Reticle with Numbered Grid, 10x10 grid of 1mm Squares, each square numbered from 0 to 99
NE38
Eyepiece Reticle with 3 Squares 10mm, 7mm, 4mm. Area Ratio A:B is 1:3 and B:C is 1:2
NE57C
Eyepiece Reticle with Miller Squares pattern, 8x8 mm large square with centered smaller square, ratio 10:1
NE71
Eyepiece Reticle with 20x20 Indexed Grid pattern, 10mm x 10mm grid with 0.5mm squares, marked 1-20, A-T
G47
Eyepiece Reticle with 100 points.
G54
Eyepiece Reticle to ASTM E562. Two Concentric Circles of Crosses, 16 on outer circle, 8 on inner circle.
G55
Eyepiece Reticle to ASTM E562. 5 X 5 Square Grid of Crosses.
NG14
Eyepiece Reticle for Geological and Soil Analysis. 10mmx10mm square of 100 crosses in a 10x10 Array
NG21
Eyepiece Reticle for Lennox for Grain Analysis. Array of dashed Squares and Crosses.
顆粒尺寸分佈
Particle Sizing Distribution包裝樣式
NG1
Eyepiece Reticle with central Rectangle and Globes/Circles for particle sizing and counting
NG2
Eyepiece Reticle with central Rectangle and Globes/Circles
NG10
Eyepiece Reticle to satisfy Bristish Standard BS3625/BS3260
NG12
Eyepiece Reticle with ruled grid and Globes/Circles for particle sizing and counting
特定圖案
Specialist Designs包裝樣式
G22
Eyepiece Reticle with Walton/Beckett for Asbestos 3-1 Ratio. All with calibration factor of 4 for use with 40x objectives.
G23
Eyepiece Reticle with Squares identified A, B and C and are sized 4mm, 7mm and 10mm. Horizontal Scale is 10mm subdivided into 100 divisions of 0.1mm (100µm).
G24
Eyepiece Reticle with Walton/Beckett for Asbestos 5-1 Ratio. All with calibration factor of 4 for use with 40x objectives.
G25
Eyepiece Reticle with Walton/Beckett (1996) for Asbestos. All with calibration factor of 4 for use with 40x objectives.
G48
Eyepiece Reticle with Kotter pattern for analysis of bitumous coal and anthracite.
G49
Eyepiece Reticle with Henning Reseau Pattern (Zeiss Integrating Disc 1). 25 points on 6 horizontal lines.
G50
Eyepiece Reticle with 100 point integrating pattern.
G57
Eyepiece Reticle for analysis in pharmaceutical applications
NE57
Eyepiece Reticle with Miller Squares pattern, 7x7 mm large square. The ratio of large to small square is 9:1
GW3
Eyepiece Reticle with Weibel Type 3 pattern for Stereology. Pattern has a series of dots and horizontal dashes with alternate lines 'out of phase'.
NG30
Eyepiece Reticle with Dots ranging from 0.050mm (50µm) to 0.400mm (400µm).
NG52
Eyepiece Reticle with Chalkley Point pattern. A single Circle divided into quarters and populated with 25 points (dots).
NGM1
Eyepiece Reticle with Mertz pattern for Stereology
NGW1
Eyepiece Reticle with Weibel Type 1 pattern for Stereology. 15 Lines of equal length connecting the certicals of a regular hexagon point network.
NGW2
Eyepiece Reticle with Weibel Type 2 pattern for Stereology. Square area containing horizontal lines with spaces between of equal length.
统一编号：28376870
服务邮箱： service@totalsmart.com.tw
地址：40744 台湾台中市西屯区河南路2段262号10楼之7
Monday – Friday
8:30 am – 5:30 pm CST
导航： 
多媒体： 
电话： 04-27080265 ∣ 传真：04-27080263
台北电话： 02-89924292 ∣ 传真：02-89929426
公司网站https://www.totalsmart.tw (繁體 ∣ 简体 ∣ English)
https://www.totalsmart.com.tw (繁體)
https://www.totalsmart.com.cn (简体)
Copyright © 2025 Total-Smart Technology Co., Ltd. All Rights Reserved. | Privacy Policy | Terms of Use |