Long Scales PS & PS XO Series
SUPERIOR CALIBRATION SCALE : PS100XO,PS150XO,PS200XO,PS300XO
UAL SCALE CALIBRATION SLIDE : PS52P,PS52N
CONTACT NONPARALLEX SCALE : P6,P16
LONG SCALE : PS100, PS150, PS300, PS300HS,PS500, PS1000
MKII HD LONG SCALE : PS100HS, PS150HS, PS200HS, PS300HS MKII
LONG MICROMETER SCALE : PS50
Key Features
100mm high definition scale in 0.1mm divisions with additional dot and cross series at 10mm centres
High definition 100mm scale in 0.1mm divisions with extended 0.5mm, 1.0mm and 5.0mm lines to allow calibrations in those increments too. Series of dots and crosses, at 10mm intervals, included for calibrations where these shapes are preferred. Supplied in polished wooden case.
|
|
|
|
Pattern |
Description |
Size |
Order code |
|
PS100XO |
100mm combination scale, 100mm ruling in 0.1mm divisions, 1mm dots at 10mm centres, crosses at 10mm centres |
130mm x 30mm x 6mm, green float glass, bright chrome image |
05B01062e |
|
|
As above but with UKAS certificate of calibration, 10 points measured on scale |
|
05B01062/UKA |
All scales can also be supplied with NPL (National Physical Laboratory) Certificates of Calibration.
Key Features
150mm high definition scale in 0.1mm divisions with additional dot and cross series at 10mm centres
High definition 150mm scale in 0.1mm divisions with extended 0.5mm, 1.0mm and 5.0mm lines to allow calibrations in those increments too. Series of dots and crosses, at 10mm intervals, included for calibrations where these shapes are preferred. Supplied in polished wooden case.
Note: Part of PS150XO scale shown.
|
Pattern |
Description |
Size |
Order code |
|
PS150XO |
150mm combination scale, 150mm ruling in 0.1mm divisions, 1mm dots at 10mm centres, crosses at 10mm centres |
180mm x 30mm x 6mm, green float glass, bright chrome image |
05B01063 |
|
|
As above but with UKAS certificate of calibration, 10 points measured on scale |
|
05B01063/UKA |
All scales can also be supplied with NPL (National Physical Laboratory) Certificates of Calibration.
Key Features
200mm high definition scale in 0.1mm divisions with additional dot and cross series at 10mm centres
High definition 200mm scale in 0.1mm divisions with extended 0.5mm, 1.0mm and 5.0mm lines to allow calibrations in those increments too. Series of dots and crosses, at 10mm intervals, included for calibrations where these shapes are preferred. Supplied in polished wooden case.
Note: Part of PS200XO scale shown.
|
Pattern |
Description |
Size |
Order code |
|
PS200XO |
200mm combination scale,200mm ruling in 0.1mm divisions,1mm dots at 10mm centres, crosses at 10mm centres |
230mm x 30mmx 6mm, green float glass, bright chrome image |
05B01065 |
|
|
As above but with UKAScertificate of calibration, 10 points measured on scale |
|
05B01065/UKA |
All scales can also be supplied with NPL (National Physical Laboratory) Certificates of Calibration.
Key Features
300mm high definition scale in 0.1mm divisions with additional dot and cross series at 10mm centres
High definition 300mm scale in 0.1mm divisions with extended 0.5mm, 1.0mm and 5.0mm lines to allow calibrations in those increments too. Series of dots and crosses, at 0mm intervals, included for calibrations where these shapes are preferred. Supplied in polished wooden case.
Note: Part of PS300XO scale shown.
|
Pattern |
Description |
Size |
Order code |
|
PS300XO |
300mm combination scale, 300mm ruling in 0.1mm divisions, 1mm dots at 10mm centres, crosses at 10mm centres |
330mm x 30mm x 6mm, green float glass, bright chrome image |
05B01064 |
|
|
As above but with UKAS certificate of calibration, 10 points measured on scale |
|
05B01064/UKA |
All scales can also be supplied with NPL (National Physical Laboratory) Certificates of Calibration.
IMPORTANT NOTE: If you are buying a scale that is to be DKD certified you will need an ultra-flat, ultra-parallel version in order for the calibration to be performed successfully. The measuring method is different than that used in UKAS and most other accredited laboratories. Please enquire for more details.
Key Features
New Dual-Scale Calibration Slides
2″ Imperial (English) and 50mm Metric Scales on a Single Slide
Positive and Negative Versions
Unique Serial Number for Traceability
Available with Internation
Graticules Optics has introduced this calibration slide that have the benefit of dual imperial/metric scales. The PS52P is for transmitted light applications and has a bright chrome positive image. It is ideal for calibrating optical products with a large field of view, such as stereo microscopes or imaging systems.
|
Pattern |
Description |
Order code |
|
PS52P |
Dual Micrometer Calibration Slide, 76mm x 25mm, positive image, 50mm in 0.1mm divisions and 2" in 0.005" divisions, serial numbered, supplied in wooden case |
05B01052P |
|
|
PS52P with UKAS certificate |
05B01052P/UK |
All scales can also be supplied with NPL (National Physical Laboratory) Certificates of Calibration.
Key Features
Glass scale for in-contact measurements, 300mm length scale in 0.5mm divisions
|
Pattern |
Description |
Order code |
|
P16 |
Contact Non Parallex Scale 300mm/0.5mm divisions |
22B01303 |
|
|
P16 Scale complete with UKAS certificate of calibration |
22B01303/UKA |
Key Features
Glass scale for in-contact measurements, 100mm length scale in 0.1mm divisions
|
Pattern |
Description |
Order code |
|
P6 |
Contact Non Parallax Scale 100mm/0.1mm divisions |
22B01300 |
|
|
P6 Scale complete with UKAS certificate of calibration |
22B01300/UKA |
Key Features
Long scale, 100mm length in 0.1mm subdivisions
Overall size: 130mm x 30mm x 6mm
Line width: 0.03mm
Accuracy (overall): 0.015mm
|
Pattern |
Description |
Order code |
|
PS100 |
Long Scale 100mm in 0.1mm divisions |
05B01053 |
|
|
PS100 with UKAS certificate |
05B01053/UKA |
|
|
PS100 with NPL Certificate |
05B01053/NPL |
Key Features
Long scale, 1000mm length in 1mm subdivisions
Glass scale 1000mm length subdivided into 1mm divisions. Supplied in wooden case.
Line width: 0.07mm
Overall size: 1030mm x 30mm x 6mm
Also available with UKAS or NPL traceable certificate of calibration.
|
Pattern |
Description |
Order code |
|
PS1000 |
Long Scale 1000mm in 1mm divisions |
05B01058 |
|
|
PS1000 with UKAS certificate |
05B01058/UKA |
|
|
PS1000 with NPL Certificate |
05B01058/NPL |
Key Features
New High Definition Scale, 100mm in length with 1mm divisions, suitable for line edge or line centre calibrations
Overall size: 130mm x 30mm x 6mm
Line width: 0.07mm
Line Length: All 8mm
Accuracy (overall): 0.008mm
|
Pattern |
Description |
Order code |
|
PS100 HSMKII |
High Definition Long Scale 100mm in 1mm divisions |
05B01069 |
|
|
PS100HS MKII with UKAS certificate |
05B01069/UKA |
Key Features
Long scale, 150mm length in 0.1mm subdivisions
Overall size: 180mm x 30mm x 6mm
Line width: 0.03mm
Accuracy (overall): 0.015mm
|
Pattern |
Description |
Order code |
|
PS150 |
Long Scale 150mm in 0.1mm divisions |
05B01055 |
|
|
PS150 with UKAS certificate |
05B01055/UKA |
|
|
PS150 with NPL Certificate |
05B01055/NPL |
Key Features
New High Definition Scale, 150mm in length with 1mm divisions, suitable for line edge or line centre calibrations
Overall size: 180mm x 30mm x 6mm
Line width: 0.07mm
Line Length: All 8mm
Accuracy (overall): 0.008mm
|
Pattern |
Description |
Order code |
|
PS150HS MKII |
Long Scale 150mm in 1mm divisions (HIGH DEFINITION) |
05B01066 |
|
|
PS150HS MKII with UKAS certificate |
05B01066/UKA |
Key Features
New High Definition Scale, 200mm in length with 1mm divisions, suitable for line edge or line centre calibrations
Overall size: 230mm x 30mm x 6mm
Line width: 0.07mm
Line Length: All 8mm
Accuracy (overall): 0.008mm
|
Pattern |
Description |
Order code |
|
PS200 HSMKII |
High Definition Long Scale 200mm in 1mm divisions |
05B01067 |
|
|
PS200HS MKII with UKAS certificate |
05B01067/UKA |
|
|
PS200HS MKII with NPL Certificate |
05B01067/NPL |
Key Features
Long scale, 300mm length in 0.1mm subdivisions
Glass scale 300mm length subdivided into 0.1mm divisions. Supplied in wooden case.
Line width: 0.03mm
Overall size: 330mm x 30mm x 6mm
Also available with UKAS or NPL traceable certificate of calibration.
Note: Higher resolution versions of 300mm scales available - see PS300XO and PS300HS MKII
|
Pattern |
Description |
Order code |
|
PS300 |
Long Scale 300mm in 0.1mm divisions |
05B01056 |
|
|
PS300 with UKAS certificate |
05B01056/UKA |
|
|
PS300 with NPL Certificate |
05B01056/NPL |
Key Features
Long scale, 300mm length in 1mm subdivisions.
MKII HIGH DEFINITION VERSION NOW AVAILABLE – SEE PS300HS MKII
Overall size: 330mm x 30mm x 6mm
Line width: 0.07mm
Accuracy (overall): 0.01mm
|
Pattern |
Description |
Order code |
|
PS300HS |
Long Scale 300mm in 1mm divisions (High specification) |
05B01061 |
|
|
PS300HS with UKAS certificate |
05B01061/UKA |
Key Features
New High Definition Scale, 300mm in length with 1mm divisions, suitable for line edge or line centre calibrations
Overall size: 330mm x 30mm x 6mm
Line width: 0.07mm
Line Length: All 8mm
Accuracy (overall): 0.008mm
|
Pattern |
Description |
Order code |
|
PS300HS MKII |
Long Scale 300mm in 1mm divisions (HIGH DEFINITION) |
05B01068 |
|
|
PS300HS MKII with UKAS certificate |
05B01068/UKA |
IMPORTANT NOTE: If you are buying a scale that is to be DKD certified you will need an ultra-flat, ultra-parallel version in order for the calibration to be performed successfully. The measuring method is different than that used in UKAS and most other accredited laboratories. Please enquire for more details.
Key Features
Long calibration scale, 50mm length subdivided into 0.1mm divisions, supplied on 75mm x 75mm glass plate, unique serial number for traceability
Overall size: 75mm x 75mm x 3mm
Line width: 0.012mm
Accuracy (overall): 0.002mm
|
Pattern |
Description |
Order code |
|
PS50 |
Micrometer Scale 50mm in 0.1mm divisions, on 75x75mm glass plate |
05B01051 |
|
|
PS50 with Grats certificate |
05B01051/GRA |
|
|
PS50 with UKAS certificate |
05B01051/UKA |
|
|
PS50 with NPL Certificate |
05B01051/NPL |
Key Features
Long scale, 500mm length in 1mm subdivisions
Glass scale 500mm length subdivided into 1mm divisions. Supplied in wooden case.
Line width: 0.07mm
Overall size: 530mm x 30mm x 6mm
Also available with UKAS or NPL traceable certificate of calibration.
|
Pattern |
Description |
Order code |
|
PS500 |
Long Scale 500mm in 1mm divisions |
05B01057 |
|
|
PS500 with UKAS certificate |
05B01057/UKA |
|
|
PS500 with NPL Certificate |
05B01057/NPL |
Key Features
New Dual-Scale Calibration Slides
2″ Imperial (English) and 50mm Metric Scales on a Single Slide
Positive and Negative Versions
Unique Serial Number for Traceability
Available with Internation
Graticules Optics has introduced this new calibration slide that has the benefit of dual imperial/metric scales. The PS52N has a negative pattern, formed in low reflective chrome for incident light applications to give excellent contrast. It is ideal for calibrating optical products with a large field of view, such as stereo microscopes or imaging systems.
|
Pattern |
Description |
Order code |
|
PS52N |
Dual Micrometer Calibration Slide, 76mm x 25mm, negative image, 50mm in 0.1mm divisions and 2" in 0.005" divisions, serial numbered, supplied in wooden case |
05B01052N |
|
|
PS52N with UKAS Certificate |
05B01052N/UK |
