QImaging 產品服務專線:04-27080265

Scientific Camera | Teledyne QImaging

QImaging Retiga R6 ™ CCD 科研級顯微鏡專用數位相機

同時具備高畫素(High Pixel Count)和大視野(Large Field of View)的高解析數位相機(High Resolution Camera)

 

QIMAGING Retiga R3 ™ CCD

Retiga R6 TM CCD是一款具備科研級技術規格的六百萬畫素數位相機,採用最新Sony ICX695 CCD Sensor,製冷式晶片整合了Intelligent Quantification TM 智慧圖像處理技術,可校正感光晶片上有缺陷的像素並能消除微弱光成像時的雜訊和暗電流,藉以提高相機的動態範圍進而提升影像檢測與量化的極限。

USB3.0高速傳輸介面,為標準即插即用裝置,相機的讀出速率可達 50 MHz,在全解析成像時,畫面更新率為6.9 fps,在Binning 2 x 2模式下畫面更新率可達10.9 fps,結合相機的超高靈敏度特性,不論是靜態影像高解析度拍照或是大視野組織切片拼圖掃描、活細胞動態螢光擷取等應用,都可以輕鬆勝任,滿足大多數對高速、高靈敏度成像的顯微拍照應用需求。

Ocular™是QImaging全新的影像拍照軟體,專為科學應用設計,操作界面簡潔直觀,無需培訓就能立即上手使用。

產品特色

  • 75%的峰值量子效率配合低電子雜訊設計,可以探測到工業相機無法探測到的弱信號
  • 延長曝光時間或使用像素融合(Binning)技術,可以使用深度製冷的晶片探測到極弱的信號
  • 50 MHz雙通道讀出端口提高了相機畫面更新率,讓對焦速度和拍攝樣品更加流暢
  • 減少照明光對樣品的光漂白(Photobleaching )和光毒性(Phototoxicity)
  • Intelligent Quantification™智慧圖像處理技術,採用先進的即時FPGA算法來獲得更高品質的影像
  • 全新Ocular拍照軟體

 

產品應用

  • 間隔時間拍照 (Time-Lapse Imaging)
  • 顯微鏡影像拼圖與縫圖 (Tile & Stitch Microscopy)
  • 立體顯微鏡拍照 (Stereo microscopy)

 

產品型號

Retiga R6 Scientific CCD Camera
  • Model: 01-RET-R6-R-M-14-C (monochrome)
  • Model: 01-RET-R6-R-CLR-14-C (color)

 

產品規格

CCD Sensor
Sensor Type Sony ICX-695 Scientific Interline CCD (Monochrome or Color)
CCD Array 2688 x 2200
Pixel Size 4.54μm x 4.54μm
Sensor Dimensions 12.5mm x 10mm (16mm diagonal)
Peak Quantum Efficiency 75% at 600nm
Full Well Capacity >9,000e- single pixel (>20,000e- with on-chip binning)
Camera
Digital Output 14 bit
Digitization Rate USB3: 50MHz high frame rate
Read Noise < 5.5e- RMS
Frame Rate 7.1 fps (full resolution); 12.8 fps (binned 2x2)
Exposure Time Range 25 µs - 60 min
Supported Binning Modes 1x1, 2x2, 4x4, 6x6, 8x8, 12x12, 16x16
Dark Current Rate (typical) 0.0009 e/p/s at -12ºC regulated
Sensor Cooling -12ºC stabilized at 22ºC ambient; Thermoelectric cooling with forced air
Intelligent Quantification Features (monochrome only) Defect correction (nearest neighbor); Dynamic Dark Frame subtraction
Interfacing
Computer Platforms/ Operating Systems Windows 7 (64 bit), Windows 8 (64 bit), Windows 10 (64 bit) Refer to the QImaging website for the latest list of minimum computer recommendations
Digital Interface USB 3.0
Triggering I/O Signals Trigger In, Expose Out, End-of-Frame, Shutter Out
Supported Triggering Modes Trigger First, Strobe, Bulb
Mechanical
Optical Interface 1”, C-mount optical format
Mounting Hole Thread Size 1/4” - 20 thread, 4 sides
Camera Dimensions 98.4mm x 76mm x 76mm (length x width x height)
Weight 1.55lb, 0.72kg
Power Requirement 7.5V DC, 2.5A
產品資源

search_offcanvas

X

Right Click

禁止任意複製或拷貝網站內容!